When it comes to audio cables, there are several brands and types available, with the choice depending on what you are trying to hook up and how concerned you are with the quality of the sound. In general 5-7% of total cost is adequate for investing in the cables for the system. If you are not terribly concerned with sound quality and are just listening to things like news and music in the background then you can use pretty much any cable, even the cheap one packaged with your system.
For those who are more serious about listening, and want to go for better sound quality, there are affordable offerings from cable specialists. These cables are designed for optimum sound quality, and are also much sturdier than generic cables. One can also spend several hundred dollars for a pair of speaker cables or analog audio interconnects. It’s tough to make the case that the sonic benefits of these cables merit such a lavish expenditure, but the true audio elite may find that the pride in owning the very best is worth the sacrifice.
The basic purpose of a cable is to transfer the signal from point A to point B unadulterated. At audio frequencies the goal is to minimize losses by controlling the amount of Resistance, Inductance and Capacitance. There are four basic kinds of cables that one can use which are analog audio cables, audio video cables, audio speaker cable and digital cables.
RCA audio cables have one connection for the left audio channel, and one connection for the right audio channel, as they are grouped in stereo pairs. The connections are used for passing analog line-level audio signals between components. You need to use low capacitance, well shielded cables for line level analog interconnects so that interference and outside noise do not drift into the signal.
The most important cables are video cables as very high frequency signals travel through them. Audio video cables provide proper impedance, adequate shielding and solid terminations found with high frequency, and the right type of cable can be critical. So the shielding and maintenance of the proper characteristic impedance need to be aspects of a video cable.
Audio Speaker cables are usually fairly thick, and have two conductors; they can be tipped with spade lugs, metal pins, banana plugs or just bare wire. One needs to ensure that there is the tightest connection of the cable to amp and loudspeaker to minimize contact resistance. One should always remember to keep the speaker cable runs as short as possible and not to loop excessive cables as this may slightly increase cable inductance.
There are two basic types of digital audio cables, optical and coaxial. Digital audio signals are transmitted as pulses of light by optical cables, while coaxial digital cables transfer digital audio signals. Coaxial digital cables look like standard analog RCA cables, and are usually a single cable, but analog RCA cables have normally double plugs, providing stereo audio. These both, optical and coaxial are a special group of cables.
Good quality audio cables generally cost around 7% of the total audio system cost and can be chosen from several brands. They can be categorized as analog cables, audio video cables, audio speaker cable and digital cables. Analog cable uses RCA connectors that come in stereo pairs for left and right channels. Video cable carries signals at a very high frequency while speaker cables are generally thicker and have two wires. They should connect to speakers and amplifiers with least contact resistance and should be as short as possible. Digital cables can be either optical or coaxial and carry audio signals in digital form.
Recent Comments